25. 05. 2013 |
Home
WIKUS Global Website Material groups
1 |
Structural steels, deep drawing steels, machining steels | 2 |
Case hardened steels, spring steels, quenched and tempered steels | 3 |
Low alloyed hot-working steels |
4 |
Nitriding steels, high alloyed hot-working steels | 5 |
Unalloyed tool steels | 6 |
Cold working steels |
7 |
High-speed steels | 8 |
Cast iron | 9 |
Rust and acid-resistant steels (light) |
10 |
Rust and acid-resistant steels (heavy) | 11 |
Duplex and heat-resistant steels | 12 |
Nickel-base alloys |
13 |
Aluminum | 14 |
Copper | 15 |
Brass |
16 |
Aluminum bronze | 17 |
Titanium alloys | 18 |
Steels with tensile strength > 1000N/mm² |
19 |
Abrasive building materials | 20 |
Silicon, glass, glass fiber, marble | * |
Special applications |
Suitable
Recommendation
Article group 550 TCGrit K
(approx. 1500 HV)
| Dimensions | Grit sizes | |||
| Width x thickness | ||||
| mm | inch | TC 181 | TC 301 | TC 525 |
| 10 x 0,65 | 3/8 x 0.025 | K | ||
| 13 x 0,50 | 1/2 x 0.020 | K | ||
| 13 x 0,65 | 1/2 x 0.025 | K | K | |
| 20 x 0,80 | 3/4 x 0.032 | K | K | |
| 25 x 0,90 | 1 x 0.035 | K | ||
| 32 x 1,10 | 1-1/4 x 0.042 | K | ||
Material groups
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
*
- For abrasive and mineral materials
- For tires
continuous coating K
Alternative blade dimensions upon request.
© Copyright WIKUS-Sägenfabrik |
Terms and Conditions